|
|
We offer a range of release agents from M/s
Chemical Innovations Limited , England . These find use in rubber,
polyurethane, FRP industries. The basic grades are listed below. Should you
require further information please do sent us an
e-mail or fill-in the feedback form
|
Polymers to be Released |
Processing Type |
Typical Application |
Recommended Bulk |
Recommended Aerosol |
|
Polyurethane |
Cold cure elastomer e.g. Cilcast |
Filters, tooling, general engineering products |
905
910 |
1711E
1812E |
|
Polyurethane |
Hot cure elastomer e.g. Monothane / Duothane |
Engineering components |
745
905
910 |
1711E
1812E |
|
Polyurethane |
Integral skin semi-flexible foam |
Automotive parts - Furniture arms etc. |
920 |
|
|
Polyurethane |
Integral skin with in-mould paint |
Automotive parts - Furniture arms etc. |
920 |
|
|
Polyurethane |
Integral skin rigid foam |
VDU panels, artificial beams, etc. |
736 |
|
|
Polyurethane |
Rigid foam |
Insulation |
726 |
|
|
Polyurethane |
Cold cure flexible |
Cushions etc. |
726 |
|
|
Polyurethane |
Footwear microcellular foam |
Shoes - Units or direct on |
905
920 |
|
|
Most polymer types |
Injection/compression moulding etc. |
General products |
383
393 |
406E
654E |
|
Fluorocarbon |
Injection/compression moulding etc. |
Oil seals, etc. |
393 |
654E |
|
Natural Rubber |
Injection/compression moulding etc. |
General products |
383 |
406E, 654E |
|
Nitrile |
Injection/compression moulding etc. |
Seals, gaskets |
505 |
406E, 654E |
|
Chloroprene |
Injection/compression moulding etc. |
General moulding |
383, 505 |
654E |
|
Blends |
Tyre moulding |
Tyres |
383, 485 |
654E |
|
Blends |
Tyre building |
Tyres |
505 |
406E |
|
Butyl |
General moulding |
Bellows, etc. |
383, 485, 505 |
406E, 654E |
|
Epoxy |
Cold/hot cure casting |
Electrical components e.g. potting |
|
1711E |
|
Epoxy |
Cold laminating |
GRP with or without Gelcoat |
726 |
|
|
Phenolic |
Compression moulding |
Brake linings, clutch pads |
392
393
394 |
|
|
Polyester |
Cold casting |
Decorative mouldings |
|
1812E |
|
Polyester |
Cold laminating |
GRP |
726 |
|
|
ABS |
Vac forming |
General |
|
1711E |
|
Acrylic |
Injection moulding |
|
|
1812E |
|
Nylon |
Moulding |
Engineering components |
505 |
1812E, 406E |
|
PVC |
Injection moulding |
Toys, buckles etc. |
505 |
406E, 654E |
|
Polystyrene |
Moulding |
Packaging |
|
654E |
|
|
