CILBOND RUBBER/POLYURETHANE TO METAL/OTHER SUBSTRATE BONDING AGENTS |
Elastomer |
One Coat System |
Two Coat System |
Comments |
Acrylic (ACM) |
10E 24 89E 65W |
12E/80E |
General purpose Cilbond 10E For 'S' cured try Cilbond
24 |
Butyl (IIR) Chlorobutyl (CIIR) |
24 89E |
12E/80E |
2 coat system bonds a wider range of compounds |
Chloroprene (CR) |
24 89E |
12E/80E |
24 or 12E/80E is preferred for best environmental
resistance |
Chlorosulphonated Polyethylene (CSM) |
24 89E |
12E/80E |
24 is first choice |
Chlorinated Polyethylene (CPE) |
24 89E |
12E/80E |
24 is first choice |
Epichlorhydrin (ECO) |
24 89E |
12E/80E |
24 gives the highest resistance to methanol / toluene
blends |
EPDM and EPR Sulphur cured |
89E |
12E/80E |
12E/80E is the first choice and offers excellent resistance to glycol,
brake fluid and heat |
EPDM and EPR Peroxide cured |
89E |
12E/80E |
12E/80E is the first choice and offers excellent resistance to glycol,
brake fluid and heat |
Fluoroelastomer (FKM) Bisphenol or Amine cured |
33 A/B 65W |
12E/(33 A/B) |
33 A/B is the first choice |
Fluoroelastomer (FKM) Peroxide cured |
65W 33 A/B |
|
Both 65W and 33 A/B benefit from post cures to improve
adhesion |
Natural (NR) Styrene Butadiene (SBR) Polybutadiene (BR) or
Polyisoprene (IR) High S Cures |
24 89E |
12E/80E |
12E/80E bonds all cure types. For higher temperature glycol
resistance, 24 or 12E/80E are first choices. |
Natural (NR) Styrene Butadiene (SBR) Polybutadiene (BR) or
Polyisoprene (IR) Low S Cures |
89E 24 |
12E/80E |
12E/80E bonds all cure types. For higher temperature glycol
resistance, 24 or 12E/80E are first choices. |
Natural (NR) Styrene Butadiene (SBR) Polybutadiene (BR) or
Polyisoprene (IR) Peroxide Cures |
89E
|
12E/80E |
12E/80E bonds all cure types. |
Polynorbornene |
24 89E |
12E/24 12E/80E |
Prebake usually required |
Nitrile (NBR) S Cures |
10E 89E |
12E/80E |
10E best suited for oil seals 12E/80E most versatile for all types
of NBR |
Nitrile (NBR) Peroxide Cures |
89E 10E |
12E/80E |
10E best suited for oil seals 12E/80E most versatile for all types
of NBR |
Carboxylated NBR (XNBR) |
10E 22 89E |
12E/80E |
|
Hydrogenated NBR (HNBR) S Cures |
10E 89E
24 65W |
12E/80E |
For 1 coat system, a prebake may be necessary. 12E/80E is the most
versatile having the best environmental resistance. |
Hydrogenated NBR (HNBR) Peroxide Cures |
89E 65W |
12E/80E |
65W suits oil seal applications |
Hydrogenated NBR (HNBR) Acrylic Modified Peroxide Cures |
89E |
12E/80E |
12E / 80E suits all types of cure systems |
PVC / NBR Blends |
10E 89E |
10E/80E 12E/80E |
Prebakes may be necessary. |
Polypropylene Oxide (Parel®) |
24 89E |
12E/80E |
1 coat gives best adhesion otherwise 12E/80E gives best results for a
2 coat system |
Polyurethane Castable Hot cure 90oC |
49SF 45SF 49SF + B |
|
45SF or 49SF is the standard for DUOTHANE®, Vulkollan®, Adiprene®,
Vibrathane etc. Cilbond 49SF+B gives the ultimate in water and heat
resistance |
Polyurethane Castable Quasi systems
(50-80oC) |
49SF 49SF + B 41 + B |
|
For bonding Quasi systems at 50-80oC with 49SF a prebake is
required. For improved environmental resistance use 49SF + B or 41 +
B |
Polyurethane Castable Cold Cure 20oC, plus
Sprayable PU's & rotational casting |
41 41 + B 49SF + B |
|
41 is best for standard polyol / isocyanate cold cures. 41 + B or 49SF
+ B is best for amine based fast cures and for exceptional environmental
resistance. |
TPU |
49SF 45SF |
|
49SF is the standard for TPU Prebakes are
recommended |
Millable PU |
89E 49SF |
12E/80E |
49SF for NCO cures, 89E and 12E/80E for peroxide and 'S'
cures. |
Silicone (VMQ) |
65W 35 |
|
For best heat resistance apply 2 coats of 65W and dry both at elevated
temperature to avoid resin spotting |
TPE |
89E |
12E/80E |
89E is the first choice |
Engage® Ethylene octene copolymer (POE) |
89E |
12E/80E |
12E/80E is the first choice |
Vamac® S Cures Vamac G (Ethylene Acrylate)
|
24 10E 89E |
12E/80E |
24 is best for bonding Vamac G series giving heat resistance of >
200oC. |
Vamac® P Cures Vamac D (Ethylene Acrylate) |
89E 24 |
12E/80E |
|
Advanta® (Vamac®/Viton® alloys) |
|
12E/80E |
12E/80E bonds all alloys, even Viton® rich
blends |
Ethylene Vinyl Acetate (EVM) |
24 |
12E/80E |
2 coat system bonds a very wide range of compounds and is first
choice |
Miscellaneous Bonding PU/NR (Cured NR) |
89E |
45SF/80 49SF/80 |
Minimum 95oC to activate Cilbond 80E onto NR Minimum
70oC to activate Cilbond 89E onto NR |
EPDM/CR |
89E 80E |
|
|
EPDM/CPE |
80E 89E |
|
|
Polypropylene bonding |
89E 80E |
|
Prime freshly flame or ionisation treated PP with 89E or
80E |
Hytrel® Metals |
49SF |
49SF/45SF |
Prebake 49SF on metal |